Sản phẩm
3 Phase Solar Panel Inverter
# Parallel Function up to maximum 9 units : Enlarge More Loads .
# Communication option: External WIFI, Supervise at Any Time.
# Slim Body, Convenient Installation And Transportation, Cheaper Freight by Air,Sea and Land.
# PF1.0, High Efficiency, Lower consumption : Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving.
3 phase solar panel inverter
Feature:
# Parallel Function up to maximum 9 units : Enlarge More Loads .
# Communication option: External WIFI, Supervise at Any Time.
# Slim Body, Convenient Installation And Transportation, Cheaper Freight by Air,Sea and Land.
# PF1.0, High Efficiency, Lower consumption : Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving.
# Support working without battery:Reduce solar system cost and save money.
# High precision of output voltage,±5 percent ,take care of your appliances.
# Intelligent power supply mode,intelligent distribution of solar panel/mains/battery power shares.
# Lithium battery auto-restart function: more convenient for lithium battery charging.
# Utility charging voltage/PV charging voltage adjustable: Meet different battery charging requirements.
# Battery reverse connection protection with fuse switch: safer installation.
Product Parameters:
| BWGA 3 phase solar panel inverter data sheet | ||||
| Model | GA3024ML | GA3024MH | GA5048MH | |
| Input | Phase | L plus N plus PE | ||
| Nominal Voltage | 208/220/230/240VAC | |||
| Voltage Range | 154-264VAC±3V(Normal Mode) 185-264VAC±3V(UPS Mode) | |||
| Frequency Range | 50Hz/60Hz(Adaptive) | |||
| Output | Rated Power | 3000W | 3000W | 5000W |
| Output Voltage(AC) | 208/220/230/240VAC±5 percent | |||
| Output Frequency | 50/60Hz±0.1 percent | |||
| Waveform | Pure sine wave | |||
| Transfer Time( Optional) | 10ms for computer , 20ms for home appliances | |||
| Peak power | 6000VA | 6000VA | 10000VA | |
| Overload | Battery Mode: 1min@102 percent ~110 percent Load 10s@110 percent ~130 percent Load 3s@130 percent ~150 percent Load 200ms@>150 percent Load | |||
| Peak efficiency (battery mode) | >94 percent | >94 percent | >94 percent | |
| Battery | Rated voltage | 24Vdc | 24Vdc | 48Vdc |
| Constant voltage charging voltage (Optional) | 28.2Vdc | 28.2Vdc | 56.4Vdc | |
| Floating charge voltage (Optional) | 27Vdc | 27Vdc | 54Vdc | |
| charger | PV charging method | MPPT | MPPT | MPPT |
| PV max input power | 1500W | 3500W | 5500W | |
| MPPT tracking range | 30~115Vdc | 120~430Vdc | 120~430Vdc | |
| Max PV input voltage | 145Vdc | 450Vdc | 450Vdc | |
| Max PV charging current | 60A | 60A | 80A | |
| Max AC charging current | 60A | 60A | 80A | |
| Max charging current | 120A | 60A | 80A | |
| Display | LCD display | Operating mode/load/input/output, etc. | ||
| Communication port | RS232 | 5PIN/Pitch2.0mm, baud rate 2400 | ||
| Expansion & configuration port | 2×5PIN/Pitch2.54mm, lithium battery BMS communication card, WIFI card, dry contact card, etc. | |||
| Parallel interface | No | Yes | ||
| Environmental parameters | Operating environment temperature | 0~40 degree | ||
| Operating environment humidity | 20 percent ~95 percent (Non condensing) | |||
| Storage temperature | -15~60 degree | |||
| Altitude | The altitude should not exceed 1000m, derating above 1000m, up to 4000m, refer to IEC62040 | |||
| Noise | Less than or equal to 50db | |||
| Certifications | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 | |||





Solar Panel Installation Without Battery Power As A Backup System
A hybrid solar inverter can work without batteries. This type of system is attached to solar panels and to the power grid which supplies power from both.
The energy produced by the solar panels is directed to the house for use and they do not need to produce all the electricity to run an entire household as shortfalls can be made up from the power grid.
Advantages of installing solar power without battery backup include:
· Savings on electricity bills
· Less costly to install
· More environmentally friendly
· Fewer components to maintain
However, a major disadvantage is that it will not provide power during a black-out or power outage. An installation with battery backup includes batteries that allow electricity to be stored for later use.
Different battery banks vary in size and are charged by both the solar panels and the power grid. The advantage is that the lights stay on even during a power outage.
However, it is more costly to install and there are more components to maintain.
If you live in an area where there is a constant, reliable power grid, a solar power installation system without battery backup will be ideal as it will save you money.
Are you looking to go solar or utilise an off-grid battery system in your home?
At Benwei, we provide purpose-built mounting equipment for the solar power industry as well as high-quality solar batteries and inverters and are your number one choice in Benwei solar.
Chú phổ biến: 3 phase solar panel inverter, China, suppliers, manufacturers, factory, buy, price, best, cheap, for sale, in stock, free sample










